The 2012 Standardization Conference of textile mac

2022-10-21
  • Detail

The 2012 Textile Machinery Industry Standardization Conference was held

on May 7, the 2012 textile machinery industry standardization work conference hosted by the National Technical Committee for standardization of textile machinery and accessories was held in Qingdao. The meeting introduced the current situation of the standardization work of the textile machinery industry and the relevant requirements of the review of the standards of the textile machinery industry in 2012, summarized the standardization work of the Textile Machinery Standardization Committee in 2011, and carried out the standard preparation example training of the national standard gb/t1.1. At the meeting, enterprise representatives also introduced the experience of enterprise standardization work, and held group discussions on the significance of standardization work and the problems existing in enterprise standardization work

Zhu Xianmin, vice president of China Textile machinery and equipment industry association, believes that standardization is an important support to help the development of the textile machinery industry. In the future, the textile machinery industry should strengthen the implementation of standards and promote the full implementation of standards; Give full play to the role of the standard system and coordinate the synchronous improvement of various standards; Strengthen the research on strategic emerging industries and industrial transformation standards, and promote the healthy development of the industry

according to Li Yi, Secretary General of the National Technical Committee for standardization of textile machinery and accessories, in 2011, the Ministry of industry and information technology issued and implemented a total of 31 industrial standards for textile machinery in two batches, including 17 standards such as air jet looms and 14 revised standards such as automatic silk reeling machines. No national standard projects were released in 2011

as of December 31, 2011, there were a total of 420 textile machinery industry standards, including 418 recommended standards and 2 mandatory standards; According to the classification of standard categories, there are 77 basic general standards, 280 product standards, 54 method standards and 9 management standards. Most of the method standards are the standards of the 1990s. Except for the standard of rust prevention between processes, which was revised in 2011, the rest of the method standards are revised. There are a total of 96 national standards for the textile machinery industry. Except for one product standard, the rest are basic general standards. The basic general standards are all transformed from ISO international standards, and the conversion rate of international standards is 77%

this year, the textile machinery industry should complete 23 industry standard projects, including 9 textile equipment standards, 4 weaving equipment standards, 4 dyeing and finishing equipment standards, 3 textile electrical standards, 1 nonwoven machinery standard, 1 quality inspection specification standard, and 1 spinning special parts standard; Eleven national standards should be completed, of which the preparation and revision of three national standards, yarn feeder and yarn control device for knitting machine, should be completed in advance, and the remaining eight industry standards should be completed this year

Wang Guojian, the science and Technology Development Department of the China Textile Industry Federation, said that industry enterprises should pay attention to improving the progressiveness, adaptability and systematicness of the standards in the standard formulation process on Chinaplas. In the 12th Five Year Plan for the development of standardization issued by the National Standards Commission in December 2011, the fourth chapter clearly stipulates that it is necessary to formulate and revise the standards for textile safety and testing, new textile complete equipment, etc., which points out the direction for the standardization work of the textile machinery industry. After the rapid growth of standard quantification, problems such as cross duplication of product standards and increasingly unclear positioning of national standards, industrial standards and enterprise standards have been triggered. In the future, standardization work should strengthen top-level design to realize the transformation from quantity speed type to quality efficiency type. At the same time, we should also put forward an open standard system in line with China's international and international standards from the reality of China's industrial development

how should the textile machinery industry play the supporting role of industry standards? Zhaojiping, a senior engineer of Wuxi Textile Machinery Quality Inspection Center, believes that the first thing to do is to adapt to the technological development trend of the textile machinery industry. In recent years, high speed, high efficiency, high quality, short process and automation, energy conservation and consumption reduction of spinning, dyeing and finishing machinery have been the main theme of the development and innovation of new textile machinery products. Driven by this, many new processes and equipment have emerged. These innovative technologies have been transformed into industry standards, and the benign interaction between standards and technological innovation can be realized, which can improve the overall technical level of the standard system. Secondly, with the improvement of the technical level of the main machine of textile machinery, some supporting special parts manufacturing enterprises continue to innovate and improve the localization rate on the basis of digesting foreign advanced technology. Therefore, it is imperative to formulate relevant special parts standards and improve the standard system of the main machine and relevant special parts. For example, after the revision of fz/t cotton ring spinning frame drafting lower roller, the technical indicators of the main projects have approached or reached the international advanced level, which reflects the supporting role of the standard for product development and plays a positive leading role in improving the technical level of cotton drafting lower roller in China. At present, this standard has been reported to the relevant departments, and it will become one of the few product standards close to or reaching the international advanced level in the textile machinery industry standards

standardization work is not limited to the formulation and revision of national standards or industrial standards, but should run through the whole process of daily production, operation and management of textile machinery enterprises. It is reported that Hengtian Heavy Industry Co., Ltd. has used the enterprise information platform to broaden the ideas of standardization work and strengthen the standardization work in the information process. Through the implementation and promotion of CAD, pro/e, PDM, ERP and other system software projects, it has implanted product design documents, process documents and other documents into the system software for design use, established standardized information within the enterprise, realized resource sharing, and provided information for product design Production management brings great convenience

the textile machinery standardization committee revealed that the "specifications for installation and quality acceptance of viscose fiber equipment engineering" in the national standard of the "specifications for installation and quality acceptance of equipment engineering" under the auspices of the Ministry of housing and urban rural development has been reported in August last year. There are 14 national standards in the textile industry, including wool textile (Revised), acrylic fiber, spandex, polyester and solid-phase polycondensation, and jacket (Revised), and there are five national standards for installation and quality acceptance in the textile industry. No enterprise has applied for undertaking the national standards. It is hoped that units that undertake to improve the high-end supply capacity will apply for the formulation and revision of these five national standards

note: the reprinted content is indicated with the source. The reprint is for the purpose of transmitting more information, and does not mean to agree with its views or confirm the authenticity of its content

Copyright © 2011 JIN SHI